|
执行日期 |
SABER受理的产品举例 |
有关技术律例 |
|
2019年1月 |
leakage alarm system, LPG metal cylinder, gas supply hose, valves for gas cylinder, cooking stoves, LPG powered heater泄漏报警系统、液化石油气金属气瓶、供气软管、气瓶阀门、灶具、液化石油气加热器 |
M.A.-156-16-04-04燃气设备及其配件的技术律例 获得沙特质量标志后,无需CB过问 |
|
2019年4月 |
为14岁以下儿童游玩而设的产品 |
BD-131704-01海湾国度尺度玩具技术律例 |
|
含有额定电压为50至1000伏特(互换)和75至1500伏特(直流)的电器和/或电子元件的电器,电子设备及家电 |
BD-142004-01GCC Technical Regulation for Oow Voltage Electrical Equipment and Appliances |
|
|
光滑油,造动液,自动变速箱油,液压油 |
S.V.-155-16-03-01光滑油的技术律例 |
|
|
2019年6月 |
Elevator intended for public use in buildings and facilities, and certain elevator safety component |
M.A. 161-17-07-05构筑和装置用起落机技术律例 |
|
Metals and their alloys for building and civil engineering workse.g. steel sheet, steel wire, aluminium and its alloys for building purpose |
M.A. 156-16-03-01Technical Regulation of Building Materials Part 1: Metals and their Alloys for Constructions and Buildings |
|
|
绝缘和覆层资料 地砖、陶瓷、大理石、石料、油漆之表 |
M.A. 156-16-03-02Technical Regulation of Building Materials Part 2: Insulation Products and Building Cladding Materials |
|
|
液压衔接及有关产品例如,水泥、构筑石灰、石膏、预拌混凝本地货品和衍生物、混凝土砖、混凝土的化学增长剂钢筋混凝土、混凝土预造之表 |
M.A. 161-17-07-02Technical Regulation of Building Materials Part 3: Hydraulic Connections and Related Material |
|
|
Bricks, tiles, marble and stone, sanitary ware, ceramic tiles and ceramic bricksExcept cement tiles and bricksnotes: Saudi quality mark required for ceramic ware. Intervention from CB is not required after acquisition of Saudi quality mark 砖、瓦、大理石、石材、卫生洁具、瓷砖、瓷砖 水泥砖之表 注:陶瓷制品需沙特质量标志;竦蒙程刂柿勘曛竞,无需CB过问 |
M.A. 161-17-07-03Technical Regulation of Building Materials Part 4: Bricks, Tiles, Ceramic, Sanitary Ware and Related Materials |
|
|
2019年8月 |
Emulsion paints, oil paints and varnishes for use in residential and commercial buildings, and public utilities 住宅、贸易构筑和公共设施用乳胶漆、油漆和清漆 |
M.A.-155.16.03.03Technical Regulation for Paints (Dyes) and Varnishes |
|
Electric self-balancing plates (Scooters) 电动自平衡板(踏板车) |
M.A.-155-06-03-04Technical Regulation for the Electric Self-Balancing Boards (Scooter) |
|
|
Disposable products manufactured from polypropylene and polyethylene plastics which are often used for a short time 由聚丙烯和聚乙烯塑料造成的一次性产品,通常使用功夫较短 |
M.A.-156-16-04-03Technical Regulation for Degradable Plastic Products |
|
|
Front, side and rear protection barriers for trucks and trailers with a maximum weight of 3.5 tons 最大沉量为3.5吨的卡车和拖车的前、侧和后防护栏 |
M.A.-161-17-07-04Technical Regulations for Front and Rear and Side Barriers for Trucks and Trailers |
|
|
Car batteries, portable batteries, such as button cells, weighting less than 1kg 汽车电池,便携式电池,如纽扣电池,沉量幼于1kg |
M.A. -166-18-04-02Technical Regulation for Electrical Batteries |
|
|
手机,电池,电泵,洗碗机,电视,平板,幼规模太阳能系统,灯具产品 |
· Mobile Phone Batteries · Electrical Water Pumps · Dishwashers · Televisions · Laptops · Electronic Watches · Small-Scale Solar PV Energy Systems · Lighting products and accessories |
沙特iecee认证中国指定代办机构‘丽江yth2206游艇会’,我们提供电子沙特iecee清关认证服务,位于广东丽江及 江苏信阳,承接中国出口沙特企业送检服务!占有设备齐全安规尝试室、电池尝试室、EMC尝试室、环境尝试室等,可为您的产品提供iecee预测试服务内容,有关iecee认证用度及iecee认证测试要求可与我司沙特认证工程师沟通!.
沙特阿拉伯尺度组织 SASO(Saudi Standards,Metrology and Quality Organization)最近(2019年)已经强造执行IECEE认证的新划定。新划定要求管控内的产品除了需获得清关所需的产品切合性证书COC表,业务商还需提前申请并获取IECEE证书,货物能力顺利在沙特海关清关。

一、填写申请
二、提供CB证书(3年内有效,含沙特误差:220V,60Hz,英规插头,国度差距测试汇报,产品照片,产品尺寸,造作商申明,造作商出产许可证,沙特进口商交易牌照)和CB测试汇报;
三、提供造作商为产品做的切合性申明或背书
四、填写承诺申明申请IECEE
另表,必要把稳是是,沙特阿拉伯尺度组织SASO目前颁布最新通知,自2020年9月1日起,针对在沙特IECEE RC律例领域内带插头的产品,其插头都须提供SASO 2203:2018尺度的测试汇报,如下两种方式能够被接受:
(1)必须将切合SASO 2203:2018的国度误差增长到主机的IEC CB测试汇报中。
(2)第三方尝试室提供的测试汇报必须切合以下三个前提:
·IEC/ISO 17025认可的测试尝试室;
·测试的认可领域蕴含SASO 2203:2018尺度;
·该汇报中的插头型号须在主机的CB汇报中体现。
转载注明:/